EnGenius ECB350 Long Range Access Point (RJ-45, 2,4GHz, 300Mbps) Client Bridge

EnGenius ECB350 Multifunktion Wireless-N Long Range Access Point Client Bridge mit Gigabit RJ-45 (2,4GHz, 300Mbps)

Artikelnummer
ECB350
Hersteller
EnGenius
Zustand
Neu
Inhalt
1 Stück

79,95

inkl. 19 % MwSt. zzgl. Versandkosten


Sofort ab Lager, Lieferzeit ca. 1 bis 3 Werktage



  • Long Range High Power (29dBm) 
  • Wi-Fi-Datenrate: 300 Mbps (2T2R) 
  • Ethernet: 10/100/1000-based LAN / WAN-Port Anteil * 1 
  • PoE: 802.3af-Support 
  • 2 abnehmbare 5 dBi Externe Antennen 
  • Mehr Modes Support (AP / AR / CB / CR / WDS AP / WDS Bridge / WDS-Station / Repeater

Der ECB350 ist ein 300Mbps Wireless-N-Gigabit-Multifunktion-Access-Point / Client Bridge, der unbegrenzte Deckung, starke Durchdringung, sicheres Netzwerkmanagement und 802.3af PoE-Verbindung bietet. Gigabit-Ethernet bietet bis zu 10-mal schnellere Datenübertragung. Externe 5dBi Antennen bieten eine erweiterte und stabile Funkverbindung. MSSID + VLAN machen Ihre Daten sicherer und einfach zu verwalten. Die Standard-PoE-Kompatibilität mit 802.3af macht die Internet-Verbindung flexibler. Der ECB350 bietet 8 Betriebsarten, die Benutzer in einen anderen Modus in unterschiedlichen Umgebungen festlegen können. Der EnGenius ECB350 ist eine ideale Lösung für die Erweiterung eines bestehenden Netzwerks und Erhöhung der Bandbreite, um zusätzliche Benutzer unterstützen.

8 Modes in 1

Wenn der Abstand zwischen dem Client und dem Router zwischen 0-30+ Meter und 2 oder mehr Wände/Decken zwischen dem Client und dem Router liegen, wird der ECB350 empfohlen. Der ECB350 kann bis zu 50 Benutzer unterstützen.

Hardware RF: 2.4 GHz Frequency Band
  Standard: IEEE 802.11b/g/n
  IEEE 802.11b/g: 2.400~2.484 GHz
  Data Rate: Up to 300 Mbps
  Memory: 32MB
  Flash Memory: 8MB
   
Antenna Two (2) External 5 dBi Omni-Directional SMA Antennas (diversity support)
   
Physical Interface 1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps)
  1 x Reset Button
  Power Jack
   
LEDs Status Power
  LAN (10/100/1000 Mbps)
  WLAN (Wireless Connection)
   
Power Requirements  Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
  (depends on different countries)
  Active Ethernet (Power-over-Ethernet, IEEE 802.3af)
  Power Adapter (United States) 48VDC/0.375A
  Device: 12V/1A
   
Modulations  OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
   
Operating Channels 2.4 GHz
   
Receiver Sensitivity 802.11b (2.412~2.472 GHz) best ≤ -98 dBm
  802.11g (2.412~2.472 GHz) best ≤ -93 dBm
  802.11n (2.412~2.472 GHz) best ≤ -93 dBm
   
Software  
Topology  Infrastructure/Ad-Hoc
   
Operation Modes  Access Point, Client Bridge, WDS Bridge, WDS Access Point, WDS Station, Universal Repeater, Access Point Router, Client Router
   
Multiple BSSID  Supports up to 8 BSSIDs per radio
   
LAN IP (check validity and DHCP server IP range) 
   
DHCP Server DHCP range, lease time, client list
   
SSID-to-VLAN Tagging Supports 802.1q SSID-to-VLAN tagging
   
   
Spanning Tree Supports 802.1d Spanning Tree Protocol
   
Wireless  Wireless Mode: 11b/11g/11n
  Channel selection (settings vary by country)
  Channel bandwidth (Auto, 20 MHz, 40 MHz)
  Transmission rate:
  2.4 GHz: 11n only, 11b/g/n mix, 11b only, 11b/g, 11g only
   
QoS WMM  (Wireless Multimedia)
   
VPN Pass-through (PPTP, L2TP, IPSec)
   
WPS Software only
   
Management  
Tx Power Control: Adjust transmit power by dBm
   
Configuration: Web-based configuration (http)/Telnet
   
Telnet Server:  CLI
   
Firmware Upgrade:  Via web browser, settings are reserved after upgrade
   
Administrator Setting:  Administrator Username and Password Change
   
Reset Setting:  Reboot (press 1 second).
  Reset to factory default (press 10 seconds)
   
System Monitoring:  Status Statistic and Event Log
   
SNMP:  V1, V2c
   
MIB:  MIB I, MIB II (RFC1213) and private MIB
   
Traffic Measurement:  Per interface
   
Auto-channel Selection:  Automatically selecting least congested channel
   
Bandwidth Measurement:  IP range and bandwidth management
   
   
Backup and Restore:  Save and restore settings through Web interface
   
Diagnosis:  IP pinging statistics
   
Wireless / Network  PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode
  (this function will keep trying when failed or disconnected)
  PPTP: Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
  Wireless Security
  WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
  WPA/WPA2 Enterprise (WPA-EAP using TKIP)
  802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
  SSID broadcast enable/disable
  MAC Address Filtering, Up to 50 field
  L2 Isolation (Access Point mode)
  Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)
   
Environmental & Physical  
   
Temperature Range  Operating: 0 to 50ºC (32º to 122ºF)
  Storage: -20ºC to 60ºC (-4Fº to 140ºF)
   
Humidity (non-condensing) Operating: 90% or less
  Storage: 90% or less
   
Certifications  FCC, IC
   
Dimensions & Weights  
ECB350 Device  Weight: 350g / 0.77 lbs.
  Length: 135mm / 5.32”
  Width: 105mm / 4.14”
  Height: 65mm / 1.18”
   
Package Contents ECB350 N300 Indoor Access Point/Client Bridge
  12V/1A Power Adapter
  RJ-45 Ethernet Cable
  Quick Installation Guide
  CD with User Manual
– Es ist noch keine Bewertung für EnGenius ECB350 Long Range Access Point (RJ-45, 2,4GHz, 300Mbps) Client Bridge abgegeben worden. –
Artikel bewerten
1
1
2
3
4
5
Name Kommentar Sicherheitscode Captchar Image
Nach oben